>Joy: document the use of mapframe and wikidata

2024-09-07T20:35:44Z

document the use of mapframe and wikidata

New page

{{Documentation subpage}}
{{High use}}
{{Auto short description}}

{{Lua|Module:Infobox|Module:InfoboxImage|Module:Coordinates|Module:Check for unknown parameters|Module:Wikidata}}

== Usage ==
Use the following infobox for all types of [[hydroelectricity|hydroelectric]] [[power station]]s involving [[dam]]s, including [[Pumped-storage hydroelectricity|pumped-storage]]. For all types of [[wave power|wave]] and [[tidal power|tidal]] power stations, as well as all other types of power stations, please use {{Tl|Infobox power station}}.
{{Parameter names example
| name
| name_official
| image = ThreeGorgesDam-China2009.jpg
| image_size = 275px
| image_caption
| image_alt
| location_map = Earth
| location_map_size = 275px
| location_map_caption
| location_map_alt
| mapframe = 
| coordinates = {{coord|0|0|type:landmark|display=inline}}
| country
| location
| purpose
| status
| construction_began
| opening
| demolished
| cost
| builder
| designed_by
| owner
| operator
| dam_type
| dam_crosses
| dam_height_foundation
| dam_height_thalweg
| dam_length
| dam_elevation_crest
| dam_width_crest
| dam_width_base
| dam_volume
| spillway_count
| spillway_type
| spillway_length
| spillway_capacity
| spillway_volumetric_flow_rate
| spillway_type2
| spillway_length2
| spillway_capacity2
| spillway_volumetric_flow_rate2
| spillway_type3
| spillway_length3
| spillway_capacity3
| spillway_volumetric_flow_rate3
| res_name
| res_capacity_total
| res_capacity_active
| res_capacity_inactive
| res_catchment
| res_surface
| res_max_length
| res_max_width
| res_max_depth
| res_elevation
| res_tidal_range
| lower_dam_type
| lower_dam_crosses
| lower_dam_height_foundation
| lower_dam_height_thalweg
| lower_dam_length
| lower_dam_elevation_crest
| lower_dam_width_crest
| lower_dam_width_base
| lower_dam_volume
| lower_spillway_count
| lower_spillway_type
| lower_spillway_length
| lower_spillway_capacity
| lower_spillway_volumetric_flow_rate
| lower_spillway_type2
| lower_spillway_length2
| lower_spillway_capacity2
| lower_spillway_volumetric_flow_rate2
| lower_spillway_type3
| lower_spillway_length3
| lower_spillway_capacity3
| lower_spillway_volumetric_flow_rate3
| lower_res_name
| lower_res_capacity_total
| lower_res_capacity_active
| lower_res_capacity_inactive
| lower_res_catchment
| lower_res_surface
| lower_res_max_length
| lower_res_max_width
| lower_res_max_depth
| lower_res_elevation
| lower_res_tidal_range
| plant_name
| plant_coordinates = {{coord|1|1|1|N|1|1|1|E}}
| plant_operator
| plant_commission
| plant_decommission
| plant_type
| plant_hydraulic_head
| plant_turbines
| plant_pumpgenerators
| plant_pumps
| plant_capacity
| plant_capacity_factor
| plant_efficiency
| plant_storage_hours
| plant_annual_gen
| plant_annual_gen_year =
| website
| extra
}}
<syntaxhighlight lang="wikitext" style="overflow: auto;">
{{Infobox dam
| name =
| name_official =
| image =
| image_size =
| image_caption =
| image_alt =
| location_map =
| location_map_size =
| location_map_caption =
| location_map_alt =
| mapframe = 
| coordinates = 
| country =
| location =
| purpose =
| status =
| construction_began =
| opening =
| demolished =
| cost =
| builder =
| designed_by =
| owner =
| operator =
| dam_type =
| dam_crosses =
| dam_height_foundation =
| dam_height_thalweg =
| dam_length =
| dam_elevation_crest =
| dam_width_crest =
| dam_width_base =
| dam_volume =
| spillway_count =
| spillway_type =
| spillway_length =
| spillway_capacity =
| spillway_volumetric_flow_rate =
| spillway_type2 =
| spillway_length2 =
| spillway_capacity2 =
| spillway_volumetric_flow_rate2 =
| spillway_type3 =
| spillway_length3 =
| spillway_capacity3 =
| spillway_volumetric_flow_rate3 =
| res_name =
| res_capacity_total =
| res_capacity_active =
| res_capacity_inactive =
| res_catchment =
| res_surface =
| res_max_length =
| res_max_width =
| res_max_depth =
| res_elevation =
| res_tidal_range =
| lower_dam_type =
| lower_dam_crosses =
| lower_dam_height_foundation =
| lower_dam_height_thalweg =
| lower_dam_length =
| lower_dam_elevation_crest =
| lower_dam_width_crest =
| lower_dam_width_base =
| lower_dam_volume =
| lower_spillway_count =
| lower_spillway_type =
| lower_spillway_length =
| lower_spillway_capacity =
| lower_spillway_volumetric_flow_rate =
| lower_spillway_type2 =
| lower_spillway_length2 =
| lower_spillway_capacity2 =
| lower_spillway_volumetric_flow_rate2 =
| lower_spillway_type3 =
| lower_spillway_length3 =
| lower_spillway_capacity3 =
| lower_spillway_volumetric_flow_rate3 =
| lower_res_name =
| lower_res_capacity_total =
| lower_res_capacity_active =
| lower_res_capacity_inactive =
| lower_res_catchment =
| lower_res_surface =
| lower_res_max_length =
| lower_res_max_width =
| lower_res_max_depth =
| lower_res_elevation =
| lower_res_tidal_range =
| plant_name =
| plant_coordinates = 
| plant_operator =
| plant_commission =
| plant_decommission =
| plant_type =
| plant_hydraulic_head =
| plant_turbines =
| plant_pumpgenerators =
| plant_pumps =
| plant_capacity =
| plant_capacity_factor =
| plant_efficiency =
| plant_storage_hours =
| plant_annual_gen =
| plant_annual_gen_year =
| website =
| extra =
}}
</syntaxhighlight>
{{clear}}

== Parameter names and descriptions ==
{| class="wikitable plainrowheaders"
|-
! scope="col" | Parameter name
! scope="col" | Description
|-
! scope="row" | '''name'''
| Name of dam.
|-
! scope="row" | '''name_official'''
| Official name, if different from '''name'''. Preferably in native language.
|-
! scope="row" | '''image'''
| Image filename, without '''File:''' parameter. Animated (.gif) and media files (.ogv) are also allowed. If empty, then the image from the Wikidata item is used.
|-
! scope="row" | '''image_size'''
| Value to overrides the default 250px.
|-
! scope="row" | '''image_caption'''
| Caption beneath image.
|-
! scope="row" | '''image_alt'''
| [[WP:ALT|Alternative text]] for image.
|-
! scope="row" | '''location_map'''
| Name of a [[Template:Location map|location map]] file. The coordinates must be specified as well (see below).
|-
! scope="row" | '''location_map_size'''
| Value to overrides the default 250px.
|-
! scope="row" | '''location_map_caption'''
| Caption beneath location map.
|-
! scope="row" | '''location_map_alt'''
| [[WP:ALT|Alternative text]] for location map.
|-
! scope="row" | '''coordinates'''
| Geographic coordinates using {{tl|coord}}. [[Wikipedia:WikiProject Geographical coordinates#Parameters|See here]] for more details. Remember to avoid being [[Wikipedia:WikiProject Geographical coordinates#Precision|overly precise]].
|-
! scope="row" | '''country'''
| Country where the facility is located. Do not use flag icons.
|-
! scope="row" | '''location'''
| General area where located. Avoid being overly-detailed.
|-
! scope="row" | '''purpose'''
| Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes, consider using: <code>Multi-purpose</code>. Field codes: <code>F</code>=[[Flood control]], <code>I</code>=[[Irrigation]], <code>N</code>=[[Navigability|Navigation]], <code>P</code>=[[Hydroelectricity|Power]], <code>W</code>=[[Water supply]].
|-
! scope="row" | '''status'''
| Current status of the project. Enter any one of the following auto-expanding fields: <code>D</code>=Decommissioned, <code>O</code>=Operational, <code>P</code>=Proposed, <code>UC</code>=Under construction.
|-
! scope="row" | '''construction_began'''
| Date construction began, consider using {{Tl|Start date}}.
|-
! scope="row" | '''opening'''
| Date, or future date, of [[inauguration]]. Consider using {{Tl|Start date}}.
|-
! scope="row" | '''demolished'''
| Date of demolition (i.e. removal or destruction of dam). Consider using {{Tl|End date}}.
|-
! scope="row" | '''cost'''
| Total cost of development.
|-
! scope="row" | '''builder'''
| Builder(s) of the dam.
|-
! scope="row" | '''owner'''
| Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible. Example: <code>{{nowrap|Owner1: 60%}}<nowiki> </nowiki>{{nowrap|Owner2: 40%}}</code>
|-
! scope="row" | '''designed_by'''
| Designers of the dam.
|-
! scope="row" | '''operator'''
| Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam.
|-
| colspan=2 style="background-color:SKYBLUE;" | '''{{center|DAM AND SPILLWAYS}}'''
|-
! scope="row" | '''dam_type'''
| [[Dam#By structure|Type of dam]]. Enter any one of the following auto-expanding fields: <code>A</code>=[[Arch dam]], <code>B</code>=[[Barrage (dam)|Barrage]], <code>E</code>=[[Embankment dam]], <code>F</code>=[[Earth-fill dam]], <code>G</code>=[[Gravity dam]], <code>H</code>=[[Rock-fill dam]],<code>AG</code>=[[Arch-gravity dam]].
|-
! scope="row" | '''dam_crosses'''
| Body of river or stream below dam
|-
! scope="row" | '''dam_height'''
| Height of dam. Deprecated parameter; use only if '''<code>dam_height_foundation</code>''' or '''<code>dam_height_thalweg</code>''' is not known.
|-
! scope="row" | '''dam_height_foundation'''
| Height over foundation bed, with metric conversions.
|-
! scope="row" | '''dam_height_thalweg'''
| Height over [[thalweg]] (riverbed), with metric conversions.
|-
! scope="row" | '''dam_length'''
| Length of dam crown, with metric conversions.
|-
! scope="row" | '''dam_elevation_crest'''
| Height of the dam's crest above sea level, with metric conversions.
|-
! scope="row" | '''dam_width_crest'''
| Width at crest of dam, with metric conversions.
|-
! scope="row" | '''dam_width_base'''
| Width at base of dam, with metric conversions.
|-
! scope="row" | '''dam_volume'''
| Volume of material in the dam structure.
|-
! scope="row" | '''spillway_count'''
| Number of [[Spillway|spillways]].
|-
! scope="row" | '''spillway_type'''
| Type of spillway.
|-
! scope="row" | '''spillway_length'''
| Length of spillway.
|-
! scope="row" | '''spillway_capacity'''
| Capacity of spillway.
|-
! scope="row" | '''spillway_volumetric_flow_rate'''
| Spillway [[volumetric flow rate]].
|-
! scope="row" | '''spillway_type2'''
| Type of 2nd spillway.
|-
! scope="row" | '''spillway_length2'''
| Length of 2nd spillway.
|-
! scope="row" | '''spillway_capacity2'''
| Capacity of 2nd spillway.
|-
! scope="row" | '''spillway_volumetric_flow_rate2'''
| 2nd Spillway [[volumetric flow rate]].
|-
! scope="row" | '''spillway_type3'''
| Type of 3rd spillway.
|-
! scope="row" | '''spillway_length3'''
| Length of 3rd spillway.
|-
! scope="row" | '''spillway_capacity3'''
| Capacity of 3rd spillway.
|-
! scope="row" | '''spillway_volumetric_flow_rate3'''
| 3rd Spillway [[volumetric flow rate]].
|-
| colspan=2 style="background-color:SKYBLUE;" | '''{{center|RESERVOIR}}'''
|-
! scope="row" | '''res_name'''
| Name of upstream body of water, if different than "dam_crosses".
|-
! scope="row" | '''res_capacity_total'''
| Capacity of reservoir, i.e. megalitres.
|-
! scope="row" | '''res_capacity_active'''
| The active, live or useful capacity (storage) of the reservoir.
|-
! scope="row" | '''res_capacity_inactive'''
| The inactive or dead capacity (storage) of the reservoir.
|-
! scope="row" | '''res_catchment'''
| [[Drainage basin|Area of catchment]] for reservoir.
|-
! scope="row" | '''res_surface'''
| Surface area (top water level) of reservoir.
|-
! scope="row" | '''res_max_length'''
| Length of the reservoir at normal levels, with metric conversions.
|-
! scope="row" | '''res_max_width'''
| Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions.
|-
! scope="row" | '''res_max_depth'''
| Maximum water depth of reservoir.
|-
! scope="row" | '''res_elevation'''
| The reservoir's height above sea level at normal levels, with metric conversions.
|-
! scope="row" | '''res_tidal_range'''
| [[Tidal range]], if applicable.
|-
| colspan=2 style="background-color:SKYBLUE;" | '''{{center|POWER STATION}}'''
|-
! scope="row" | '''plant_name'''
| Name of plant, if applicable.
|-
! scope="row" | '''plant_coordinates'''
| Geographic coordinates of the power station using {{tl|coord}}. [[Wikipedia:WikiProject Geographical coordinates#Parameters|See here]] for more details. Remember to avoid being [[Wikipedia:WikiProject Geographical coordinates#Precision|overly precise]].
|-
! scope="row" | '''plant_operator'''
| Operator(s) of the hydroelectric power plant.
|-
! scope="row" | '''plant_commission'''
| Power plant commissioning date. May be different than dam opening date.
|-
! scope="row" | '''plant_decommission'''
| Power plant decommissioning date. May be different than dam closing date.
|-
! scope="row" | '''plant_type'''
| [[Hydroelectricity#Generating methods|Type]] of hydroelectric power station. Enter any one of the following auto-expanding fields: <code>C</code>=[[Hydroelectricity#Generating methods|Conventional]], <code>P</code>=[[Hydroelectricity#Generating methods|Pumped-storage]], <code>R</code>=[[Hydroelectricity#Generating methods|Run-of-the-river]], <code>T</code>=[[Tidal barrage]].
|-
! scope="row" | '''plant_hydraulic_head'''
| [[Hydraulic head]] at power station.
|-
! scope="row" | '''plant_turbines'''
| Number of [[Water turbine|turbines]], with respective rated capacity. Exclude any reversible turbine-generators (pump/generators) and pumps from this — it should only contain conventional generation-only turbines.
|-
! scope="row" | '''plant_pumpgenerators'''
| Number of reversible pump–generators, with respective rated capacity. For pumped storage plants only.
|-
! scope="row" | '''plant_pumps'''
| Number of pumps, with respective rated capacity. For pumped storage plants only.
|-
! scope="row" | '''plant_capacity'''
| Current installed [[Nameplate capacity|capacity]], or planned capacity for those under development. For plants which are operational, but have additional capacity under development, please use only the current installed capacity. <code>[[Watt#Megawatt|MW]]</code> suffix will be auto added to a number without unit or any text appended.
|-
! scope="row" | '''plant_capacity_factor'''
| [[Capacity factor]] of the power station, in percentage. For pumped storage, please try to rely solely on third-party sources, as manual capacity factor calculations are overly complex for PSH and their results do not align with figures in (authoritative) third-party sources.
|-
! scope="row" | '''plant_efficiency'''
| [[Efficiency|Overall efficiency]] of the power station, in percentage. Generally only applicable to pumped storage.
|-
! scope="row" | '''plant_storage_hours'''
| [[Energy storage#Storage_capacity|Storage capacity]] of the power station, in hours (if desired, you can also provide calculated or actual GWh figures in parenthesis). Generally only applicable to pumped storage.
|-
! scope="row" | '''plant_annual_gen'''
| Average annual [[Gross generation|power generation]]. To be used in combination with the following '''plant_annual_gen_year''' parameter. <code>[[GW·h]]</code> suffix will be auto added to a number without unit or any text appended.
|-
! scope="row" | '''plant_annual_gen_year'''
| Given generation value exact description. If no description is given, it will default to '''Annual''' (i.e. it will expand to ''Annual generation''). Enter following text: 
<code>'''Planned net'''</code> if given data is a planned estimate net output 
<code>'''Planned gross'''</code> if given data is a planned estimate gross output 
<code>'''YYYY net'''</code>, if given data is year YYYY net output 
<code>'''YYYY gross'''</code> if given data is year YYYY gross output 
<code>'''Annual net'''</code> if given data is a average net output 
<code>'''Annual gross'''</code> if given data is a average gross output
|-
! scope="row" | '''website'''
| Raw wikitext for entering website(s). Use <nowiki>[brackets]</nowiki> where appropriate
|-
! scope="row" | '''extras'''
| Free form, spans both columns. Use sparingly.
|-
|}

=== Coordinates ===
The coordinates should be specified using ''coordinates'' – with a {{tl|coord}} template. See [[Wikipedia:WikiProject Geographical coordinates#Parameters]] for more details about setting the coordinates_type.

===Mapframe maps===
{{Infobox mapframe/doc/parameters}}

== Microformat ==
{{UF-hcard-geo}}

== Tracking category ==
* {{clc|Pages using infobox dam with unknown parameters}}

== See also ==
{{Buildings and structures infobox templates}}

==TemplateData==
{{show
|frame-style = border: 1px solid silver; padding: 0.3em;
|head-style = background-color: #DDDDFF; text-align: center;
|1 = Click the [show] link to the right to display the [[Wikipedia:TemplateData|TemplateData]].
|2 = {{TemplateData header|nolink=1}}
<templatedata>
{
"params": {
"name": {
"label": "Name",
"description": "Name of dam",
"type": "string"
},
"name_official": {
"label": "Official name",
"description": "Official name, if different from name. Preferably in native language.",
"type": "string"
},
"image_caption": {
"label": "Image caption",
"description": "Caption beneath image.",
"type": "string"
},
"image_alt": {
"label": "Image alternative text",
"description": "Alternative text for image.",
"type": "string"
},
"location_map_caption": {
"label": "Location map caption",
"description": "Caption beneath location map.",
"type": "string"
},
"location_map_alt": {
"label": "Location map alternative text",
"description": "Alternative text for location map.",
"type": "string"
},
"coordinates": {
"label": "coordinates",
"description": "Geographic coordinates using the coord template",
"type": "string",
"required": false
},
"country": {
"label": "Country",
"description": "Country where the facility is located. Do not use flag icons.",
"type": "string"
},
"location": {
"label": "Location",
"description": "General area where located. Avoid being overly-detailed.",
"type": "string"
},
"purpose": {
"label": "Purpose",
"description": "Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes, consider using: Multi-purpose. Field codes: F=Flood control, I=Irrigation,, N=Navigation, P=Power.",
"type": "string"
},
"status": {
"label": "Status",
"description": "Current status of the project. Enter any one of the following auto-expanding fields: D=Decommissioned, O=Operational, P=Proposed, UC=Under construction.",
"type": "string"
},
"construction_began": {
"label": "Construction began",
"description": "Date construction began, consider using {{Start date}}.",
"type": "string"
},
"opening": {
"label": "Opening date",
"description": "Date, or future date, of inauguration. Consider using {{Start date}}.",
"type": "string"
},
"demolished": {
"label": "Demolished date",
"description": "Date of demolition (i.e. removal or destruction of dam). Consider using {{End date}}.",
"type": "string"
},
"cost": {
"label": "Cost",
"description": "Total cost of development.",
"type": "string"
},
"owner": {
"label": "Owner",
"description": "Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible.",
"example": "Owner1: 60% Owner2: 40%",
"type": "string"
},
"operator": {
"label": "Operator",
"description": "Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam.",
"type": "string"
},
"dam_type": {
"label": "Dam type",
"description": "Type of dam. Enter any one of the following auto-expanding fields: A=Arch dam, B=Barrage, E=Embankment dam, F=Earth-fill dam, G=Gravity dam, AG=Arch-gravity dam.",
"type": "string"
},
"dam_crosses": {
"label": "Dam crosses",
"description": "Body of river or stream below dam",
"type": "string"
},
"dam_height_foundation": {
"label": "Dam height over foundation",
"description": "Height over foundation bed, with metric conversions.",
"type": "string"
},
"dam_height_thalweg": {
"label": "Dam height over thalweg",
"description": "Height over thalweg (riverbed), with metric conversions.",
"type": "string"
},
"dam_length": {
"label": "Dam length",
"description": "Length of dam crown, with metric conversions.",
"type": "string"
},
"dam_elevation_crest": {
"label": "Dam elevation crest",
"description": "Height of the dam's crest above sea level, with metric conversions.",
"type": "string"
},
"dam_width_crest": {
"label": "Dam width crest",
"description": "Width at crest of dam, with metric conversions.",
"type": "string"
},
"dam_width_base": {
"label": "Dam width at base",
"description": "Width at base of dam, with metric conversions.",
"type": "string"
},
"dam_volume": {
"label": "Dam volume",
"description": "Volume of material in the dam structure.",
"type": "string"
},
"spillway_count": {
"label": "Spillway count",
"description": "Number of spillways.",
"type": "number"
},
"spillway_type": {
"label": "Spillway type",
"description": "Type of spillway.",
"type": "string"
},
"spillway_capacity": {
"label": "Spillway capacity",
"description": "Capacity of spillway.",
"type": "string"
},
"res_name": {
"label": "Reservoir name",
"description": "Name of upstream body of water, if different than \"dam_crosses\".",
"type": "string"
},
"res_capacity_total": {
"label": "Reservoir capacity",
"description": "Capacity of reservoir, i.e. megalitres.",
"type": "string"
},
"res_capacity_active": {
"label": "Reservoir active capacity",
"description": "The active, live or useful capacity (storage) of the reservoir.",
"type": "string"
},
"res_capacity_inactive": {
"label": "Reservoir inactive capacity",
"description": "The inactive or dead capacity (storage) of the reservoir.",
"type": "string"
},
"res_catchment": {
"label": "Reservoir catchment area",
"description": "Area of catchment for reservoir.",
"type": "string"
},
"res_surface": {
"label": "Reservoir surface area",
"description": "Surface area (top water level) of reservoir.",
"type": "string"
},
"res_max_length": {
"label": "Reservoir maximum length",
"description": "Length of the reservoir at normal levels, with metric conversions.",
"type": "string"
},
"res_max_width": {
"label": "Reservoir maximum width",
"description": "Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions.",
"type": "string"
},
"res_max_depth": {
"label": "Reservoir maximum depth",
"description": "Maximum water depth of reservoir.",
"type": "string"
},
"res_elevation": {
"label": "Reservoir elevation",
"description": "The reservoir's height above sea level at normal levels, with metric conversions.",
"type": "string"
},
"res_tidal_range": {
"label": "Reservoir tidal range",
"description": "Tidal range, if applicable.",
"type": "string"
},
"plant_name": {
"label": "Plant name",
"description": "Name of plant, if applicable.",
"type": "string"
},
"plant_operator": {
"label": "Plant operator",
"description": "Operator(s) of the hydroelectric power plant.",
"type": "string"
},
"plant coordinates": {
"label": "Plant coordinates",
"description": "Geographic coordinates of the power station using the coord template",
"type": "string",
"required": false
},
"plant_commission": {
"label": "Plant commissioning date",
"description": "Power plant commissioning date. May be different than dam opening date.",
"type": "string"
},
"plant_decommission": {
"label": "Plant decommissioning date",
"description": "Power plant decommissioning date. May be different than dam closing date.",
"type": "string"
},
"plant_type": {
"label": "Plant type",
"description": "Type of hydroelectric power station. Enter any one of the following auto-expanding fields: C=Conventional, P=Pumped-storage, R=Run-of-the-river, T=Tidal barrage.",
"type": "string"
},
"plant_hydraulic_head": {
"label": "Plant hydraulic head",
"description": "Hydraulic head at power station.",
"type": "string"
},
"plant_turbines": {
"label": "Plant turbine count/capacity",
"description": "Number of turbines, with respective rated capacity.",
"type": "string"
},
"plant_capacity": {
"label": "Plant generation capacity",
"description": "Installed generation capacity, measured in megawatts (MW).",
"type": "string"
},
"plant_capacity_factor": {
"label": "Plant capacity factor",
"description": "Capacity factor of the power station, in percentage.",
"type": "string"
},
"plant_annual_gen": {
"label": "Plant annual power generation",
"description": "Average annual power generation of the previous year. Measured in gigawatt-hours (GWh)",
"type": "string"
},
"website": {
"label": "Website",
"description": "Raw wikitext for entering website(s). Use [brackets] where appropriate",
"type": "content"
},
"extra": {
"label": "Extra data",
"description": "Free form, spans both columns. Use sparingly.",
"type": "string"
},
"location_map": {
"label": "Location map",
"description": "The name of the pushpin map. Needs coordinates.",
"example": "China",
"suggested": true
}
},
"description": "Infobox for a dam",
"format": "block"
}
</templatedata>
}}

<includeonly>{{Sandbox other||

[[Category:Buildings and structures infobox templates|Dam]]
[[Category:Water transport infobox templates|Dam]]
[[Category:WikiProject Dams]]
[[Category:Embeddable templates]]
[[Category:Templates that add a tracking category]]
}}</includeonly>

Template:Infobox dam/doc - Revision history

>Joy: document the use of mapframe and wikidata